Netshield_logo

 

ITNewsAfrica logo


Home      About Netshield     Website      Contacts    linkedin   twitter icon   facebook

 

Netshield News

 

 

 

 

 

 

GENERAL NEWS


Make sure the lights don't go out - with a smart power solution from Netshield

 

Based on the state of our current power grid system, loadshedding has become a necessary evil as it reduces the risk of a national blackout that could take the country a week to recover from. But that doesn’t reduce the business impact or lessen the blow, therefore it is critical for business to make alternative power arrangements, one such alternative is the Netshield Inverter / Charger range.

Running a generator is still the costliest power source in the long run and putting all of your devices onto an alternative power system isn’t financially viable or practical. Instead, what businesses should be doing is deciding what their “core” energy requirements are and then building a solution to fit these requirements. If you need to power your computers, lights, boardroom, access control system, security system and possibly some additional plugs – the system you require is going to cost a lot less than one that needs to power your entire powered environment including air conditioners, kettles, geysers etc.

According to Inus Dreckmeyr, CEO at Netshield South Africa the best alternative is building a power solution that supports a well thought out and calculated power requirement for your exact use case. It is with this that the Netshield inverter / charger range, a true sine wave inverter and high-power battery combination solution, can be used in three use cases, namely: high-power deep cycle line interactive UPS mode, as a grid assisted or as a generator and grid assisted energy source.

“The threat of loadshedding is something that has been hanging over the heads of South African businesses since 2008, and 11 years later we can clearly see it is not going away. What business needs are alternatives to their power supply that enable them to remain connected so that business can carry on as usual,” states Dreckmeyr. “With our range of smart power solutions we provide customers the option of increasing reliability by acting as a power storage management device that is used to ensure reliable power feeds to critical business services.

“Quintessentially is you want the most cost effective and efficient solution you need to minimise the load you want to run on the unit and combine it with renewable energy sources you can partially feed from. In this case you can then create an environment where you always use renewable first, revert to the grid to top up / charge your environment if needed or failover to generators if Eskom just isn’t available – there will be a future ROI for reducing your reliance on the grid with this use case.”

As the units can source power from either the power utility feed, a back-up diesel generator or solar arrays, their optimal deployment can only be achieved if you have accurately calculated the size of your critical load and the required backup time frame. However as it is often difficult to determine the amount of time that the power is down, in the case of load shedding we know it could be up to 4.5 hours, so you can add additional batteries to its scalable battery bank that will then serve as the primary power source if there is no power being received from any other power sources.

The size and costs of the Netshield units are entirely dependent on your desired application, the size of the installation and the existing infrastructure you would like it to connect to. Ensuring that your power consumption is optimised not only reduces the cost of a smart power backup system but also reduces the day-to-day cost of running of your business. According to Dreckmeyr the units can be naturally expanded with the addition of photo voltaic panel arrays (solar panels). You can also add an intelligent gateway if you require visibility into managing your differing power sources.

Use case for the Netshield Inverters:

High Power Deep Cycle Line interactive UPS mode
In the event of load shedding or an unstable grid connection your unit will kick into the high-power deep cycle line interactive UPS mode and will switch over into online mode within 12 milliseconds. This mode relies on the battery charge being maintained by the grid power when it is available.

Grid Assisted solution
The grid assisted inverter mode is a hybrid mode, where you can run a grid connection in conjunction with additional renewable energy resources, like solar panels. In this instance the inverter and renewable energy source will be your primary energy feed and will only switch over to the grid supply in the event that this supply has run out and the batteries need to be recharged. Once recharged it will automatically and seamlessly switch back to the inverter.

Generator Assisted mode
If you are “off the grid” this is where the generator assisted mode will be the most suitable. Batteries are charged by photo voltaic solar panels and/or wind generators, however if the renewable resource or “utility” power and/or the battery sourced power doesn’t service the actual required load, the inverter will switch over to an installed generator. While the generator is running it will concurrently charge the unit’s batteries and once the charge has been met, it will automatically switch back to the inverter. Optimising the required run time of the generator as it is switched off once the batteries have recharged.

Notably the Netshield units are designed to act as the core of a reliable power feed and work in supply from 1kVA to 12KVA continuously, and up to 2kVA to 36KVA power instantiations with a battery charging capability of up to 10 to 120Amp dependant of optimisation product selection.

"Ultimately as we are part of a global economy, we can’t simply switch our businesses off whenever the lights go off, we need to keep running which makes the consideration of alternative energy supplies a critical business decision. Our team of renewable energy experts can help you determine the scale of your operation, the load requirements you need for your core and critical applications, advise on where to source supporting tech (like batteries) and then build a solution tailored to your exacting requirements. Especially now that Eskom has introduced stage 6 load shedding as well – this is when Eskom send a technician to blow-out your candles as well!” ends Dreckmeyr.

### 

About Netshield
Netshield is a Pretoria-based technology company that specialises in providing tailor-made end-to-end IoT and Cloud based technology solutions to our clients. Our experienced teams of research and development engineers specialise in technological, element and component level development. We have a core focus on customisation right down to component levels, extended application, database, embedded software development (firmware) and electronic, electrical and optical fibre and mechanical development and design.

Established in 1994, Netshield’s business areas, development and vertical market focus extends: IT based datacentre environmental management, financial, medical, mining, automation, power generation and backup, communications and security. We offer a wide range of inhouse developed as well as third party OEM integrated IoT sensors, intelligent gateways, upstream communication interfaces, dataflow management modules, database management, REST API’s and application dashboards and analysis, that service any challenging environment and associated point of presence.

In addition, we supply pre-packaged bundled solutions that include environmental control and monitoring, IoT/Cloud-based solutions and self-contained cabinets. Within our extensive access control system portfolio, we also provide solutions that assist with the securing and tracking of high value goods during transportation and warehousing. We boast a range of renewable energy management and power backup offerings and provide bespoke solutions and development for the Mining and Industrial sectors.

Marketing Contact:
Marien Dreckmeyr
+27 12 841 0320
sales@netshieldsa.com

Media Contact:
Charlene Carroll
Anti-Clockwise Consulting
+27 11 314 2533
charlene@anticlockwise.co.za

 

 

 

Home    About Netshield     Website     ITNewsAfrica.com

 

COMPANY PRESS OFFICE

ITNewsAfrica logo